samedan logo
 
 
 
spacer
home > pmps > summer 2007 > a breath of fresh air
PUBLICATIONS
Pharmaceutical Manufacturing and Packing Sourcer

A Breath of Fresh Air

Tim Sandle at Bio Products Laboratory evaluates the validation of active air-sampling

Environmental monitoring is a programme which evaluates the cleanliness of the manufacturing environment; the effectiveness of cleaning and disinfection programmes; and the operational performance of environmental controls. As such, pharmaceutical manufacturers of both sterile and non-sterile products, as well as medical devices, are required to demonstrate that manufacturing processes and procedures minimise any potential contamination to the product from the manufacturing environment. Contamination can arise from a number of sources: water, air, surfaces and personnel, each of which poses a potential risk to product.

Each microbiological environmental monitoring method requires validation in order to show its suitability within the cleanroom environment. Due to the importance placed on environmental monitoring data, the results which the manufacturer obtains must be reproducible and assure that the aseptic environment or trends within non-sterile manufacturing are under control. Arguably, now more than ever, environmental data is scrutinised during FDA CGMP and pre-approval new drug inspections – this trend is likely to continue. This reproducibility can be established through method validation.

Although standard environmental test methods have been in existence for years and are accepted throughout the industry, they do not necessarily yield reproducible results. One type of culture media used in conjunction with one type of air-sampler in a particular facility will behave very differently to another. In addition, new test methodologies must be validated to be as good as, or better, than the methods they are replacing. This makes at least some validation of monitoring methods essential.

This article examines the validation of one aspect of microbiological monitoring: active air-sampling. Air-sampling is important as the air in most manufacturing areas is microbiologically contaminated, although the level will vary: an office will be considerably more contaminated when compared to a Grade B cleanroom. Whilst air is a vector of micro-organisms, it is not a nutritive environment. Therefore, many micro-organisms in the air die from desiccation or photosensitivity. Many other micro-organisms are anaerobic and thus will not survive or will be unable to multiply. However, microorganisms may be able to settle onto critical surfaces. As much of the risk centres on air velocities and air flows, the use of active volumetric air-samplers is important.


Read full article from PDF >>

Rate this article You must be a member of the site to make a vote.  
Average rating:
4
     

There are no comments in regards to this article.

 You must be a member of the site to make a comment.
spacer
Tim Sandle is the company Microbiologist at Bio Products Laboratory (BPL), the manufacturing unit of the National Blood Authority, a special health authority within the NHS. Prior to his current role, Tim has worked on a number of different microbiological projects within the pharmaceutical industry, including: developments in the testing of endotoxins and pyrogens for protein-based products; establishing the environmental monitoring regime for a network of over 200 cleanrooms; and validating a sterility testing isolator system. Tim has written more than 30 articles relating to microbiology and pharmaceutical operations, including LAL testing, operation of isolators, cleanrooms and environmental monitoring.
spacer
Tim Sandle
spacer
spacer
Print this page
Send to a friend
Privacy statement
News and Press Releases

ROUSSELOT INTRODUCES X-PURE® GelMA FOR TRANSLATIONAL MEDICINE

Irving, United States [03 June 2020] — Rousselot, a Darling Ingredients brand and the global leader of collagen-based solutions, takes on the digital challenge and introduces X-Pure® GelMA at Bio Digital 2020. The first GMP-ready range of gelatin methacryloyl (GelMA) biomaterials suitable for preclinical and clinical applications, X-Pure® GelMA is part of the X-Pure portfolio of ultra-pure gelatins and collagens, suitable for use as biomaterials in 3D bioprinting, tissue engineering, and regenerative medicine.
More info >>

White Papers

The Promise and Challenge of Adaptive Design in Oncology Trials

Medpace

Clinical oncology trials are more complex and time consuming than those in any other therapeutic area and failure rates are frustratingly high. Given the urgent need for new oncologic therapies, sponsors are eager to find more effective ways to conduct clinical research. Incorporating adaptive design methodologies into clinical trials can reduce costs and enhance efficiency while maintaining trial integrity. They can also reduce the number of patients on placebo and sub-therapeutic doses. In light of this promise, regulatory bodies have created guidelines supportive of adaptive design.
More info >>

 

 

 

©2000-2011 Samedan Ltd.
Add to favourites

Print this page

Send to a friend
Privacy statement