samedan logo
 
 
spacer
home > pmps > spring 2018 > protective packaging
PUBLICATIONS
Pharmaceutical Manufacturing and Packing Sourcer

Protective Packaging

Pharmaceutical companies and their logistics partners are enjoying more availability and scope of temperature-controlled distribution lanes within pharma supply chains than ever before. This means more choice when specifying thermal protection solutions that are both cost-effective and fit for purpose.

This has led to the current trend of moving away from temperature-controlled packaging, particularly as well-controlled distribution lanes and effective thermal covers become the norm. Designed to provide a greater level of protection within uncontrolled distribution lanes and general cargo facilities, temperature-controlled packaging can be costly and offer low payload efficiency, particularly for controlled distribution lanes where they are often over-engineered and provide a higher level of protection than actually required.

As a result, thermal protection solutions are becoming increasingly popular. However, this is bringing its own set of challenges, including a lack of a consistent approach to product performance assessment.

Read full article from PDF >>

Rate this article You must be a member of the site to make a vote.  
Average rating:
0
     

There are no comments in regards to this article.

spacer
Kevin Valentine is Chief Technology Officer at TP3 Global and Cool Logistics India. He has been working in the temperature-controlled packaging industry for over 26 years. Following a 10 year career at Laminar Medica, Kevin founded Cool Logistics in 2000. He joined Cool Logistics India and TP3 Global in 2016, where he has led the development of a new technical centre to provide enhanced technical services to customers. Kevin has also overseen the creation of several new products for improved thermal protection of pharmaceutical products and other temperature-sensitive cargo.
spacer
Kevin Valentine
spacer
spacer
Print this page
Send to a friend
Privacy statement
News and Press Releases

Sphere Fluidics closes a $40 million funding round led by Sofinnova Partners and Redmile Group

Cambridge, UK, 28 October 2021: Sphere Fluidics, a company that has developed and is commercialising single cell analysis systems underpinned by its proprietary picodroplet technology, announced today that it has closed a $40 million (circa 30 million) investment round. The round was led by Sofinnova Partners (Paris, France) and Redmile Group (San Francisco, USA) co-investing on equal terms.
More info >>

White Papers

Quality of Steel

Natoli Engineering Company, Inc.

Steel quality is the summation of how well a steel meets its specified chemistry, the cleanliness of the steel or degree to which it is free of impurities or inclusion, homogeneity of the microstructure, grain/carbide size and in some instances if it meets the mechanical requirements for that particular steel. In the design and manufacture of tablet compression tooling, nothing is more important than the quality of the materials being used. The best manufacturing principals maintaining the tightest tolerances will result in tool failure if the initial material quality is poor. Material quality is the fundamental building block upon which all successive value added steps are laid. The majority of all tablet compression tooling is produced from steel and steel quality is the subject of this article.
More info >>

 

 

 

©2000-2011 Samedan Ltd.
Add to favourites

Print this page

Send to a friend
Privacy statement